Titan Controls® Atlas® 8 - Digital CO2 Controller with Fuzzy Logic

Part #{{activeImage.ParentId}}
Titan Controls® Atlas® 8 - Digital CO2 Controller with Fuzzy Logic
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Atlas® 8 - Digital CO2 Controller with Fuzzy Logic
The Atlas® 8 is a digital CO2 monitor/controller. Once the CO2 level has reached your desired set point it will disable the CO2 device. It features a photocell to ensure daytime only dosing of CO2 via a generator or regulator. This controller comes with a 15 ft remote sensor that houses the photocell and CO2 sniffer. Besides having traditional injection capabilities, it also features fuzzy logic programming. Fuzzy logic applies constant calculations to the output controlling your CO2 regulator to ensure that you do not undershoot or over shoot your predetermined set point. The CO2 min/max can also be viewed on the LCD. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 Volts/60 Hz.

  • The Atlas® 8 is a digital CO2 monitor and controller.
  • Photocell to ensure 'daytime only' dosing of CO2 via a generator or regulator.
  • 15 foot remote sensor.
  • Features fuzzy logic programming. Fuzzy logic applies constant calculations to the output controlling your CO2 regulator to ensure that you do not undershoot or over shoot your predetermined set point.
  • The CO2 min/max can be viewed on the LCD.
  • Plastic enclosure resists dust, rust and moisture.
  • 15 Amps/120 Volts/60 Hz.
  • 2 year warranty.
702853 - Titan Controls Atlas 8 - Digital CO2 Controller w/ Fuzzy Logic
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
702877 - Titan Controls Atlas 8 Replacement Sensor
Download Instructions (PDF Document)
702853 - Titan Controls Atlas 8 - Digital CO2 Controller w/ Fuzzy Logic
  EACH CASE PALLET
Upc: 847127006603
Quantity:
Volume (cf): 0.4310
Dim Weight (in3/lb): 3.8389
Weight (lb): 4.6 37.4
Length (in): 12.2 25.1
Width (in): 8.8 18.5
Height (in): 6.4 13.7
702492 - Titan Controls 15 ft Sensor Extension Cable
  EACH CASE PALLET
Upc: 849969000085
Quantity:
Volume (cf): 0.077
Dim Weight (in3/lb): 0.6847
Weight (lb): 0.75
Length (in): 7.7
Width (in): 7.5
Height (in): 2.3
702877 - Titan Controls Atlas 8 Replacement Sensor
  EACH CASE PALLET
Upc: 849969015393
Quantity: 25
Volume (cf): 0.0810 3.5734
Weight (lb): 0.9 27.0
Length (in): 7.0 25.0
Width (in): 4.0 19.0
Height (in): 5.0 13.0

IMPORTANT NOTICE

INSTRUCTION MANUAL UPDATE

Page 6: Factory Reset Process:
If at any time you wish to reset the Atlas® 8 to its original factory settings, simply press and hold the 'Enter/Reset' and 'DOWN' buttons simultaneously until the display reads f.Set. Press AND HOLD the 'Enter/Reset' button again FOR TWO SECONDS to restore the controller to factory settings. Once the reset is complete the screen will display doNE.
Override function for Atlas 8
To activate the override function on the Atlas 8, use the supplied 12v power supply. This power supply is only to be used if using a separate controller/thermostat/temperature controlling device. The override function is to be used to keep your CO2 and exhaust fan from running simultaneously. For more information, refer to page 6 in the Atlas 8 instruction booklet supplied with your unit.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.