Titan Controls® Helios® 7 - 8 Light 240V Controller with Timer

Titan Controls® Helios® 7 - 8 Light 240V Controller with Timer
This controller will run eight (8) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. 24 hour timer with 15 minute non-detachable setting tabs. Easy to follow instructions & makes installation simple. Removable back panel make controller easy to wire into your power system. Universal outlets will accept 120 Volt or 240 Volt power cords. Durable 20 gauge powder-coated steel enclosure. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts. Patent No. D660,252.

  • Controller will operate up to eight(8) HID lights (8000 Watts maximum)
  • The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays
  • Reliable 24 hour German timer with 15 minute non-detachable setting tabs
  • Durable powder coated steel chassis
  • 50 Amps/240 Volt = Input power
  • 40 Amps/ 240 Volt = Output power
  • 60 Hz.
  • Hand built in the USA!
  • 3 year warranty
702676 - Titan Controls Helios 7 - 8 Light 240 Volt Controller w/ Timer
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
702676 - Titan Controls Helios 7 - 8 Light 240 Volt Controller w/ Timer
  EACH CASE PALLET
Upc: 870883000417
Quantity:
Volume (cf): 0.820
Dim Weight (in3/lb): 7.3039
Weight (lb): 10.3
Length (in): 16.4
Width (in): 13.5
Height (in): 6.4
How do I set the 24 hour timer for my lights to turn ON and OFF?
 
If you have the older model with the BLACK timer do the following:
  1. Each time tripper represents a 15 minute segment.
  2. Push time trippers towards the inner ring of the dial showing an outside orange ring for ON time for lights.
  3. Push all time trippers towards the inner ring postion for complete ON lighting schedule. (i.e. push all trippers towards center from 12:00 PM to 12:00 AM. You need to set complete schedule on timer for as long as you would like your lights to be ON. It will show an orange outer ring for ON time.
  4. Set time of day by aligning black triangle to current time of day.
  5. Lights will be operating for desired ON time setting.
 
If you have the newer model with the WHITE timer do the following:
  1. Each time tripper represents a 15 minute segment.
  2. The time switch is programmed by pushing the captive trippers to the inner ring position for the entire time period the lights are to be turned ON.
  3. When the time trippers are pushed to the outer ring, the lights will be in the OFF position.
  4. To set the current time of day, turn the minute hand clockwise. DO NOT set the time by rotating the "outer" dial. (i.e. To set time of day at 10:30 AM for 24 hour dial, turn the minute hand clockwise until 10:30 AM is aligned with the triangle on the inner dial. The hour and the minute dial will show exactly 10:30 AM.)
  5. Lights will be set to operate for desired ON time setting.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.