Titan Controls® Helios® 8 - 8 Light 240V Controller with Dual Trigger Cords

Titan Controls® Helios® 8 - 8 Light 240V Controller with Dual Trigger Cords
This controller will run eight (8) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Easy to follow instructions & makes installation simple. Dual trigger cord sets allow the operator to run two separate light timing schedules. Removable front panel make controller easy to wire into your power system. Universal outlets will accept 120 Volt or 240 Volt power cords. Durable 20 gauge powder-coated steel enclosure. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts. Patent No. D660,252.

  • Operates up to eight 1000 Watt HID lights at the same time
  • The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays
  • Step by step installation instructions are easy to follow
  • Dual 120 volt trigger cords allow the grower to run two separate lighting schedules
  • Durable powder coated steel chassis
  • 50 Amp/ 240 Volt = Input power
  • 40 Amp/ 240 Volt = Output power
  • Patent pending - 29/511,532
  • 60 Hz.
  • Hand built in the USA!
  • 3 year warranty
702677 - Titan Controls Helios 8 - 8 Light 240 Volt Controller w/ Dual Trigger Cords
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
702677 - Titan Controls Helios 8 - 8 Light 240 Volt Controller w/ Dual Trigger Cords
  EACH CASE PALLET
Upc: 870883000424
Quantity: 4 36
Volume (cf): 0.820
Dim Weight (in3/lb): 7.3039
Weight (lb): 11.45
Length (in): 16.4
Width (in): 13.5
Height (in): 6.4
What are the 'trigger cords' for?
The 'trigger cords' activate and deactivate your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 8 lighting controller. When the trigger cords activate the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cords defeat the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cords' into a 120 Volt 24 hour appliance timer (we suggest Apollo 8 or Apollo 9 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. Two trigger cords allow the grower to stagger light ON times or have two separate timing schedules. See application diagram for more information.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.