Titan Controls® Apollo® 11 - 240 Volt Digital Timer

Part #{{activeImage.ParentId}}
Titan Controls® Apollo® 11 - 240 Volt Digital Timer
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Apollo® 11 - 240 Volt Digital Timer
One (1) outlet. 1 minute intervals and run up to 20 schedules per day. Battery back-up feature saves settings in case of power failure. Heavy duty construction. Daylight savings mode to accommodate time change. Enclosure resists dust, rust and moisture. Runs lights, pumps, fans, etc. 10 Amps maximum/240 Volts/60 Hz.

  • One NEMA 6-15 240 volt power outlet
  • 1 minute intervals up to 20 programs per day
  • Battery back up features saves settings in case of power failure
  • Plastic enclosure resists dust and moisture
  • Heavy duty construction
  • Run light, pump or fan
  • 10 Amps/240 Volts/60 Hz.
  • 1 year warranty
734155 - Titan Controls Apollo 11 - 240 Volt Digital Timer (10/Cs)
Download Instructions (PDF Document)
734155 - Titan Controls Apollo 11 - 240 Volt Digital Timer (10/Cs)
  EACH CASE PALLET
Upc: 870883000943 870883000943
Quantity: 10
Volume (cf): 0.046 0.4996
Dim Weight (in3/lb): 0.4134 4.4500
Weight (lb): 0.3 4.30
Length (in): 8.1 17.80
Width (in): 4.5 9.70
Height (in): 2.2 5.00
NOTE:
This timer is not for use with digital or electronic ballasts due to the high in-rush current of the ballast. The in-rush current can be from 10 to 40 times the rated amperage for the product and this burns the contacts inside of the timer making it inoperable. We recommend using the Apollo 5 240 Volt ballast timer to operate digital and electronic ballasts.
My Apollo 11 is in 24 hour (military) time format. How do I change it to 12 hour AM & PM time format?
You can change the time formats by pressing and holding the TIME button for 3 seconds. This will change the display to the 12 hour AM/PM time format, and the Apollo 11 will show AM or PM in the corner of the display.
Why is there a '+1h' showing on my display?
This shows that the Apollo 11 is set in DAYLIGHT SAVINGS time format. It can be defeated by pressing the TIME button and the right arrow button at the same time for 3 seconds. One hour will be deducted from the current time and the '+1h' will disappear on the display screen.
My Apollo 11 isn't following my 'ON TME' and 'OFF TIME' schedule programming?
Push the 'Reset' button and re-program the Apollo 11 in the 'AUTO OFF' setting. You can accomplish this by pressing the 'MANUAL' button and scrolling through the settings until you find the "AUTO OFF' setting. This sets the Apollo 11 to turn 'ON' and 'OFF' your equipment when your grow schedule requires it.
How long will the battery back-up last in a power outage?
The battery back-up is an internal cell style battery. It cannot be replaced because it is 'hard wired' to the printed circuit board. It will retain all timing and programmed settings a minimum of 7 days during a complete power outage. The internal cell battery will have a 5 to 10 year useful life in most normal applications.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.