Titan Controls® Helios® 10 - Pre-wired 8 Light 240V Controller with Trigger Cord & Timer

Part #{{activeImage.ParentId}}
Titan Controls® Helios® 10 - Pre-wired 8 Light 240V Controller with Trigger Cord & Timer
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Helios® 10 - Pre-wired 8 Light 240V Controller with Trigger Cord & Timer
This controller will run eight (8) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Circuit breakers built right into the controller! Plug relay trigger cord into 24 hour wall timer (included)! Durable powder-coated steel enclosure. 120 Volt timed accessory outlet (max 2 Amps) for light mover or fan. Attached power cord makes timer easy to connect to your power system. Universal outlets will accept 120 Volt or 240 Volt power cords. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts. Patent No. D660,252.

  • This lighting controller will operate up to eight (8) 1000 Watt HID lights at 240 Volts
  • The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays
  • 50 Amp breaker built into the front of the controller
  • Plug relay trigger cord set into 24 hour timer (Apollo 8 - 24 hour timer included!)
  • 120 Volt timed accessory outlet (max 2 Amps) for a light mover or lighting ventilation, if required
  • Comes pre-wired 4 wire pigtail cordset - Plug-n-Play Technology
  • Durable powder coated steel chassis
  • 8 'Universal' outlets will accept either a 120 volt or 240 volt power cord sets
  • 50 Amps/ 240 Volts = Input power
  • 40 Amps/ 240 Volts = Output power
  • 60 Hz.
  • Hand built in the USA!
  • 3 year warranty
702679 - Titan Controls Helios 10 - Pre-Wired 8 Light 240 Volt Controller w/ Trigger Cord & Timer
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
702679 - Titan Controls Helios 10 - Pre-Wired 8 Light 240 Volt Controller w/ Trigger Cord & Timer
  EACH CASE PALLET
Upc: 847127000380
Quantity:
Volume (cf): 1.422
Dim Weight (in3/lb): 12.6666
Weight (lb): 15.9
Length (in): 17.9
Width (in): 17.6
Height (in): 7.8
What is the 'trigger cord' for?
The 'trigger cord' activates and deactivates your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 10 lighting controller. When the trigger cord activates the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cord defeats the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cord' into a 120 Volt 24 hour appliance timer (we suggest Apollo 6 or Apollo 7 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. See application diagram for more information.
NOTE:
The 24 hour timer CANNOT be plugged into 120 Volt outlet on the front of the Helios 10 lighting controller. It must be plugged into a separate 120 Volt outlet to function correctly.
What is the length of the range cordset that comes attached to the Helios 10?
The hardwired range cordset that comes from the bottom of the Helios 10 has a total length of 44.5 inches from the bottom of the chassis to the power output tines of the cordset.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.