Titan Controls® Helios® 13 - 16 Light 240V Controller with Timer

Part #{{activeImage.ParentId}}
Titan Controls® Helios® 13 - 16 Light 240V Controller with Timer
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Helios® 13 - 16 Light 240V Controller with Timer
This controller will run sixteen (16) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Premium quality timer with battery back-up keeps lighting schedule in the event of power failure (located on the bottom of unit). Sequenced lighting delays for each light bank. NEMA 6-15 UL Listed 240 VAC power outlets. 100 Amps input power/80 Amps output power/240 Volts/60 Hz./16,000 Watts.

  • Helios 13 controls up to 16 1000 Watt HID lights at 240 Volts
  • The only lighting controllers featuring industrial-grade Allen Bradley circuit breakers and ballast rated relays
  • Reliable 24 hour timer with 150 hour battery back-up in case of power failure
  • Sequenced lighting delays for each light bank
  • ETL listed for use in commercial applications
  • NEMA 6-15 UL listed 240 VAC power outlets
  • 20 gauge powder coated steel chassis
  • 100 Amps/ 240 Volt = Input power
  • 80 Amps/ 240 volts = Output power
  • 60 Hz.
  • Single phase power required
  • Manufactured in the USA!
  • 3 year warranty
702828 - Titan Controls Helios 13 - 16 Light Controller w/ Timer
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
Download Electrical Schematic (PDF Document)
702828 - Titan Controls Helios 13 - 16 Light Controller w/ Timer
  EACH CASE PALLET
Upc: 847127002070
Quantity:
Volume (cf): 4.241
Dim Weight (in3/lb): 37.7735
Weight (lb): 40.55
Length (in): 30.25
Width (in): 28.5
Height (in): 8.5
How do I set the 24 hour timer for my lights to turn ON and OFF?
 
To set your 24 hour timer do the following:
  1. Each time tripper represents a 15 minute segment.
  2. Push time trippers towards the inner ring of the dial showing an outside orange ring for ON time for lights.
  3. Push all time trippers towards the inner ring position for complete ON lighting schedule. (i.e. push all trippers towards center from 12:00 PM to 12:00 AM. You need to set complete schedule on timer for as long as you would like your lights to be ON. It will show an orange outer ring for ON time.
  4. Set time of day by aligning black triangle to current time of day.
  5. Lights will be operating for desired ON time setting.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.