Titan Controls® Helios® 17 - 24 Light 240V Controller with Dual Trigger Cords

Part #{{activeImage.ParentId}}
Titan Controls® Helios® 17 - 24 Light 240V Controller with Dual Trigger Cords
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Helios® 17 - 24 Light 240V Controller with Dual Trigger Cords
This controller will operate twenty-four (24) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Two (2) trigger cord sets activate lighting controller via external timers. Sequenced lighting delays for each light bank. All duplex outlets have circuit breaker protection. NEMA 6-15 UL Listed power outlets. 150 Amps input power/120 Amps output power/240 Volts/60 Hz./24,000 Watts.

  • Helios 17 controls up to 24 1000 Watt HID lights at 240 Volts
  • The only lighting controllers featuring industrial-grade Allen Bradley circuit breakers and ballast rated relays
  • Two trigger cord sets activate lighting banks via external timers
  • Sequenced lighting delays for each light bank
  • ETL listed for use in commercial applications
  • NEMA 6-15 UL listed 240 VAC power outlets
  • 150 Amps/ 240 Volt = Input power
  • 120 Amps/ 240 Volt = Output power
  • 60 Hz.
  • Single phase power required
  • Manufactured in the USA!
  • 3 year warranty
702840 - Titan Controls Helios 17 - 24 Light 240 Volt Controller w/ Dual Trigger Cords
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
Download Electrical Schematic (PDF Document)
702840 - Titan Controls Helios 17 - 24 Light 240 Volt Controller w/ Dual Trigger Cords
  EACH CASE PALLET
Upc: 847127002100
Quantity:
Volume (cf): 4.026
Dim Weight (in3/lb): 35.8634
Weight (lb): 52.35
Length (in): 30.25
Width (in): 28.75
Height (in): 8
What are the 'trigger cords' for?
The 'trigger cords' activate and deactivate your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 17 lighting controller. When the trigger cords activate the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cords defeat the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cords' into a 120 Volt 24 hour appliance timer (we suggest Apollo 8 or Apollo 9 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. Two trigger cords allow the grower to stagger light ON times or have two separate timing schedules. See application diagram for more information.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.