Titan Controls® Helios® 9 - Pre-wired 4 Light 240V Controller with Trigger Cord & Timer

Part #{{activeImage.ParentId}}
Titan Controls® Helios® 9 - Pre-wired 4 Light 240V Controller with Trigger Cord & Timer
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Helios® 9 - Pre-wired 4 Light 240V Controller with Trigger Cord & Timer

This controller will run four (4) HID lights at 240 Volts. The only lighting controllers featuring industrial-grade ballast rated relays. Circuit breakers built right into the controller! Plug relay trigger cord into 24 hour wall timer (included)! Durable powder-coated steel enclosure. 120 Volt timed accessory outlet (max 2 Amps) for light mover or fan. Attached power cord makes timer easy to connect to your power system. Universal outlets will accept 120 Volt or 240 Volt power cords. 30 Amps input power/20 Amps output power/240 Volts/60 Hz./4000 Watts. Patent No. D660,252.

  • This lighting controller will operate up to four (4) 1000 Watt HID lights at 240 Volts
  • The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays
  • 30 Amp breaker built into the front of the controller
  • Plug relay trigger cord set into external 24 hour wall timer (Apollo 8 - 24 hour timer included!)
  • 120 Volt timed accessory outlet (max 2 Amps) for a light mover or lighting ventilation
  • Comes pre-wired 4 wire pigtail cordset - Plug-n-Play Technology
  • 4 'Universal' outlets will accept 120 Volt or 240 Volt powercords
  • Durable powder coated steel chassis
  • 30 Amps / 240 Volts = Input power
  • 20 Amps/240 Volts = Output power
  • 60 Hz.
  • Hand built in the USA!
  • 3 year warranty
702678 - Titan Controls Helios 9 - Pre-Wired 4 Light 240 Volt Controller w/ Trigger Cord & Timer
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)

Questions for Titan Controls® Helios® 9 - Pre-wired 4 Light 240V Controller with Trigger Cord & Timer

No questions have been asked about this product yet.
Q: {{q.Question}}
A: {{q.Answer}}
{{q.VoteCount}} people found this helpful {{q.VoteCount}} person found this helpful
Did you find this question helpful?

Couldn't find an answer?

Ask your question here.
Providing an email will allow for a one-time alert when your question has been answered.
Thank you for submitting your question. Check back soon to receive an answer. You will receive an email when one of our customer service representatives has answered your question.
702678 - Titan Controls Helios 9 - Pre-Wired 4 Light 240 Volt Controller w/ Trigger Cord & Timer
  EACH CASE PALLET
Upc: 847127000373
Quantity: 3
Volume (cf): 1.4566 4.7413
Weight (lb): 12.65 39.6
Length (in): 18.0 24.2
Width (in): 17.7 18.5
Height (in): 7.9 18.3
What is the 'trigger cord' for?
The 'trigger cord' activates and deactivates your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 9 lighting controller. When the trigger cord activates the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cord defeats the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cord' into a 120 Volt 24 hour appliance timer (we suggest Apollo 6 or Apollo 7 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. See application diagram for more information.
NOTE:
The 24 hour timer CANNOT be plugged into 120 Volt outlet on the front of the Helios 9 lighting controller. It must be plugged into a separate 120 Volt outlet to function correctly.
What is the length of the range cordset that comes attached to the Helios 9?
The hardwired range cordset that comes from the bottom of the Helios 9 has a total length of 44.5 inches from the bottom of the chassis to the power output tines of the cordset.
{{replacementPartsListModel.ParentPartId}} - {{replacementPartsListModel.ParentPartName}}