Part #{{activeImage.ParentId}}
Titan Controls® Hercules® 3 - Power Expander - 15 Amps
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Hercules® 3 - Power Expander - 15 Amps

The Hercules® 3 is a trigger cord style power controller. It provides the opportunity to utilize an independent 15 amp outlet to run an appliance via the cord (i.e. operate a dehumidifier). Your gear can be activated by the trigger cord set via an environmental controller or timer. The Hercules® 3 comes with a 15 ft trigger cord set, and a heavy duty ballast rated relay to handle the heaviest of power loads. Will operate any 120 volt appliance at 15 amps. Enclosure resists dust, rust, and moisture. 15 Amps maximum/120 Volts/60Hz.

  • Operates dehumidifiers, humidifiers, heaters, fans, lighting, CO2, pumps, or other 120 volt appliances.
  • Extra-long 15 ft 'trigger' cord set
  • Dependable high quality, heavy duty power relay
  • Chassis resists dust, rust, and moisture
  • Hand crafted in the USA!
  • 15 Amps/ 120 Volt/ 60 Hz.
  • 2 year warranty
702773 - Titan Controls Hercules 3 Power Expander - 15 Amp (15/Cs)
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)

Questions for Titan Controls® Hercules® 3 - Power Expander - 15 Amps

No questions have been asked about this product yet.
Q: {{q.Question}}
A: {{q.Answer}}
{{q.VoteCount}} people found this helpful {{q.VoteCount}} person found this helpful
Did you find this question helpful?

Couldn't find an answer?

Ask your question here.
Providing an email will allow for a one-time alert when your question has been answered.
Thank you for submitting your question. Check back soon to receive an answer. You will receive an email when one of our customer service representatives has answered your question.
702773 - Titan Controls Hercules 3 Power Expander - 15 Amp (15/Cs)
Upc: 849969009880
Quantity: 15
Volume (cf): 0.1637 3.6599
Weight (lb): 1.35 22.15
Length (in): 9.7 17.6
Width (in): 5.4 17.1
Height (in): 5.4 13.4
Can I use an extension cord with this product?
Yes, you can! It is recommended that you use an extension cord that is suitable for the load that you are running on the Hercules 3.
Why do I have to run my appliance and my trigger cord on separate circuits?
Normally, the trigger cord is plugged into your environmental controller to operate your appliance. If you run both the environmental controller and the appliance on the same circuit, you may overload the circuit and trip the breaker. By putting the appliance on circuit "A" and the envrionmental controller on circuit "B", you can run up to a 15 Amp appliance and still control other devices from your environmental controller because you've now got 30 Amps (15 Amps from circuit "A" and 15 Amps from circuit "B" ) to operate your grow gear.
{{replacementPartsListModel.ParentPartId}} - {{replacementPartsListModel.ParentPartName}}