The Kronus 2 controls temperature, humidity and CO2 in your grow area at your preferred settings. The built in ten (10) minute 'CO2 delay' feature deactivates the CO2 generator if settings are exceeded by using a digitally based control system. The software polls the temperature and humidity setting ten minutes after the CO2 outlet is defeated to verify if the temperature and humidity are too high, and then activates your exhaust fan or dehumidifier to lower the conditions under the settings. If the temperature or humidity drops below the set point during the 10 minute 'CO2 delay', then the exhaust/dehumidification process is defeated and the 'CO2 ON' outlet is reactivated, saving your valuable CO2 and keeping it amongst the plants where it provides the most benefits.
The Kronus 2 activates an exhaust fan or dehumidifier if the temperature or humidity exceeds the preferred settings. The 'CO2 ON' feature is only activated during daylight periods to enrich your garden with CO2 when your plants are able to uptake it, and is disabled during the nighttime hours or when the humidity or temperature exceeds the preferred settings. Plug your exhaust fan or dehumidifier into the 'Exhaust Fan Output' and plug your CO2 tank with emitter system or CO2 generator into the 'CO2 Output' and you're all set!
|702645 - Titan Controls Kronus 2 - Temperature & Humidity Controller|
|Dim Weight (in3/lb):||3.5852|