Titan Controls® Helios® 12 - 8 Light 240V Controller with Dual Trigger Cords

Part #{{activeImage.ParentId}}
Titan Controls® Helios® 12 - 8 Light 240V Controller with Dual Trigger Cords
Part #{{activeImage.ParentId}} Download Image
Titan Controls® Helios® 12 - 8 Light 240V Controller with Dual Trigger Cords
This controller will run eight (8) HID lights at 240 Volts. The only lighting controllers featuring two (2) industrial-grade ballast rated relays. Plug dual relay trigger cord set into 24 hour wall timers to run your lights. Universal outlets allow total flexibility. Enclosure resists dust, rust and moisture. 50 Amps input power/40 Amps output power/240 Volts/60 Hz./8000 Watts.

  • This controller will operate eight (8) 1000 Watt HID lights at 240 volts
  • The only lighting controllers featuring industrial-grade Allen Bradley ballast rated relays
  • Plug dual relay trigger cord set into external 24 hour wall timer to run your lights
  • Easy to use and simple to operate
  • Enclosure resists dust, rust and moisture
  • 50 Amps/ 240 Volt = Input power
  • 40 Amps/240 Volt = Output power
  • 60 Hz.
  • Hand built in the USA!
  • 2 year warranty
702825 - Titan Controls Helios 12 - 8 Light 240 Volt Controller w/ Dual Trigger Cords
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)
702825 - Titan Controls Helios 12 - 8 Light 240 Volt Controller w/ Dual Trigger Cords
  EACH CASE PALLET
Upc: 847127000403
Quantity: 6 48
Volume (cf): 0.450 4.1522
Dim Weight (in3/lb): 4.0117 36.9845
Weight (lb): 7.85 65.70
Length (in): 12.1 25.00
Width (in): 9.6 20.50
Height (in): 6.7 14.00
What are the 'trigger cords' for?
The 'trigger cords' activate and deactivate your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 12 lighting controller. When the trigger cords activate the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cords defeat the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cords' into a 120 Volt 24 hour appliance timer (we suggest Apollo 8 or Apollo 9 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. Two trigger cords allow the grower to stagger light ON times or have two separate timing schedules. See application diagram for more information.

    Sort By:
   Brand:
    Category:
Sorry No Results Found...
Title MSRP Wish List
{{part.PartId}}
{{part.PartId}}
{{part.Name}}
{{part.Name}}
{{part.Message}}
NEW
{{Sunlight.Web.Utility.GetFormattedPrice(part.EachMsrp)}}
 Wish List
 Find Retailer
Your results were limited to 50 items. You may want to be more specific.