Titan Controls® Helios® 4 - 4 Light 240 V Controller with Relay Trigger Cord

{{defaultName}}

HGC702675 - Titan Controls Helios 4 - 4 Light Controller w/ Trigger Cord
Download Application Diagram (PDF Document)
Download Instructions (PDF Document)

Questions for Titan Controls® Helios® 4 - 4 Light 240 V Controller with Relay Trigger Cord

No questions have been asked about this product yet.
Q: {{q.Question}}
A: {{q.Answer}}
{{q.VoteCount}} people found this helpful {{q.VoteCount}} person found this helpful
Did you find this question helpful?

Couldn't find an answer?

Ask your question here.
Providing an email will allow for a one-time alert when your question has been answered.
Thank you for submitting your question. Check back soon to receive an answer. You will receive an email when one of our customer service representatives has answered your question.
HGC702675 - Titan Controls Helios 4 - 4 Light Controller w/ Trigger Cord
  EACH CASE PALLET
Upc: 870883003203
Quantity: 4 48
Volume (cf): 0.875 3.638 64.556
Dim Weight (in3/lb): 10.882 45.232 802.532
Weight (lb): 8.850 37.750 0.000
Length (in): 16.600 27.600 48.000
Width (in): 13.600 17.000 40.000
Height (in): 6.700 13.400 58.100
What is the 'trigger cord' for?
The 'trigger cord' activates and deactivates your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 4 lighting controller. When the trigger cord activates the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cord defeats the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cord' into a 120 Volt 24 hour appliance timer (we suggest Apollo 6 or Apollo 7 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. See application diagram for more information.
NOTE:
The 24 hour timer CANNOT be plugged into 120 Volt outlet on the front of the Helios 4 lighting controller. It must be plugged into a separate 120 Volt outlet to function correctly.
What is the 'trigger cord' for?
The 'trigger cord' activates and deactivates your light bank. It uses a standard 120 Volt circuit to open and close the high power relay inside the Helios 4 lighting controller. When the trigger cord activates the relay, you will hear a 'thunk' sound. This is the relay turning ON your light bank. When the trigger cord defeats the 120 Volt power to the relay, you will hear the 'thunk' sound again and your lights will be OFF. To operate your light bank, plug the 'trigger cord' into a 120 Volt 24 hour appliance timer (we suggest Apollo 6 or Apollo 7 120V timers) and set your required lighting schedule (normally 18 hours in vegatative stage and 12 hours in flowering stage). Your grow lights will operate based on the ON/OFF settings on the 24 hour timer. See application diagram for more information.
NOTE:
The 24 hour timer CANNOT be plugged into 120 Volt outlet on the front of the Helios 4 lighting controller. It must be plugged into a separate 120 Volt outlet to function correctly.
{{replacementPartsListModel.ParentPartId}} - {{replacementPartsListModel.ParentPartName}}